[admin@MikroTik] > /snmp print                                                                              
           enabled: yes           
           contact:               
          location:               
  engine-id-suffix:               
         engine-id: 80003a8c04    
       src-address: ::            
       trap-target:               
    trap-community: public        
      trap-version: 1             
   trap-generators: temp-exception
               vrf: main          

[admin@MikroTik] > /snmp community print                                                                    
Flags: * - DEFAULT
Columns: NAME, ADDRESSES, SECURITY, READ-ACCESS, WRITE-ACCESS
#   NAME    ADDRESSES  SECURITY  READ-ACCESS  WRITE-ACCESS
0 * public  ::/0       none      yes          no    
      
[admin@MikroTik] > /system resource print                                                            
                   uptime: 50m1s              
                  version: 7.20.5 (stable)    
               build-time: 2025-11-27 08:17:04
         factory-software: 6.46               
              free-memory: 75.5MiB            
             total-memory: 128.0MiB           
                      cpu: MIPS 74Kc V4.12    
                cpu-count: 1                  
            cpu-frequency: 600MHz             
                 cpu-load: 15%                
           free-hdd-space: 108.2MiB           
          total-hdd-space: 128.0MiB           
  write-sect-since-reboot: 158                
         write-sect-total: 50331              
               bad-blocks: 0%                 
        architecture-name: mipsbe             
               board-name: RB2011UiAS         
                 platform: MikroTik    
       
[admin@MikroTik] > /tool snmp-get oid=1.3.6.1.2.1.1.1.0 community=public address=127.0.0.1          
OID                                                              TYPE             VALUE                                                                          

timeout
[admin@MikroTik] > /tool snmp-get oid=1.3.6.1.2.1.1.1.0 community=public address=192.168.0.1
OID                                                              TYPE             VALUE                                                                          

timeout
[admin@MikroTik] >